Enphase Enlighten
View in App StoreGrow your in-app revenue
while we take care of your subscription management.
Mobile
SDK by Qonversion.
Price Intelligence based on:
213,534
apps aggregated
8,172,290
in-app prices defined
89
main categories
In-App Purchase Price (Subscription or Non-Recurring)
vs. average for the Utilities category, $, by region
Build, analyze, and grow in-app subscriptions
with the most powerful mobile SDK for subscriptions
User Reviews for Enphase Enlighten
Good app, but some suggestions
I’ve been impressed with the information available from this app. Good ability to compare power generation (in kWh) from hour to hour, day to day, and panel to panel. I’ve only had my array live for ~1 week, so further comparisons will be available later. I do, however, find a few things wrong with this app. (1) It only reliably gives kWh, not kw. I should be able to see the instantaneous power coming from the array, and should be able to see it panel by panel. In one screen, they make a feeble attempt to show kw coming from the full array, but it’s almost certainly wrong - it usually says 0.3 kw or so for the full 20 kw array in full sunlight! (2) the array view should rotate with my phone, to enlarge the display. (3) The panel-by panel view should also show kw, not kWh.
Conflicting alert messages
This morning I reported an alert that connection to the Envoy was interrupted. I called WindMar and they said is typical since in their all was fine.I told them that all panels (30 of them) their was no information in them providing production and previously their was one pane in kwh and only one providing it a Wh.In addition we were producing 6.9 and utilizing 2.2. Suddenly with the same amount of sun it was reporting from one moment to the next production of 0.5 kwh the home from 2.2 changed to the same amount of production of 0.5 whereas the steady consumption was 2.2 kwh.At one point we decide to turn a 18,000 A/C unit and both production and consumption remained as if nothing had ever happened.Again call WindMar and they told me these occurrences are normal.I know is not Enphase is lacking the right technology, the installation is flawed or the folks have no clue of how it should work.I know these report are faulty hence you cannot have a proper calculation of real output and when battery power will go into effect, or the input of the panel production is also crazy with full sun reporting from 6.6 to 1.4 to one minute to the next and sunshine everywhere.Hope you can get something out of this but something is not right. Had the system for about three weeks only. Thank you.
Top Tier App
One new note:I dont like the new “Energy Independence” stat front and center. Technically I depend on the grid to supply electric BUT I make more energy than I use, so the rest is banked for the future, which I will likely never even need at this point. That said, it feels more like a marketing gimmick to sell their new battery system. Original Review:Other than the occasional hiccups on their servers, this app is amazing. Its become an invaluable addition to my phone. Great job to the programming team. I love my solar system and this app is an important part of that massive investment. Thank you to all involved. Also the tech support team is among the best Ive ever had experience with.
Enphase products and app
I am very impressed with the quality of the Enphase controller and microprocessor for my solar panels/batteries/grid access. There is absolutely no indication of the system changing from the solar panels powering the house/batteries powering the house/grid powering the house. Not the slightest flickering of lights or anything else when the controller switches power source. The app is pretty good for showing where the power is coming from/going to. I do wish the app would include a description (and more details) of the Storm Guard software. I can find no mention of it on the app. The only way I learned of it was through a chat with tech support, but would like more info and would appreciate if a complete description were available on the app.
Enphase micro-inverter monitor
I purchased this device with my solar system in Nov 2016. I installed the PV system in March 2017 during new construction and was finally ready to set up the Enphase monitor today (April 2018.) The setup process went exactly as it should and the instructions were actually accurate. The only thing I have left to do is set up the array. The monitor scanned my system and found every inverter. All serial numbers and specs downloaded exactly as it was described in the instructions and the sync from the toolkit to Myenlighten was accomplished on the first try. I would not call the setup “easy,” but if you read the instructions all the way through before you start and then follow them, your results should be the same as mine... Perfect!
This version is horrible
Why? This new interface text is tiny and difficult to read. The graphics are chunky and outdated. My biggest complaint is with the “energy” tab. The old version allowed you to scroll your finger over the timeline and clearly see progress through the day. This version try’s to do that, but the information is displayed in a tiny “pop up” box which is hidden by your thumb as you scroll. Also (and more important) the numbers at the top of the page which show “production” and “consumption” do change as you scroll your thumb, but do not display the same numbers shown in the “pop up” box. I can’t figure out what they’re supposed to represent. I called emphase customer service (two days after the update) and they didn’t know either. They said they’d look into it. I also don’t understand why Enphase changed their smooth colorful graphics in the “energy tab” to the blocky analog style graphics they are using today.I like the idea of the “currency widget” but unless you allow us to include more information (like consumption costs) the widget is a novelty. I’m sure a lot of decisions go into these updates , but I hope Enphase can swallow their pride and realize this app is worse, not better than what we had before.
Much better and easier to use
The redesign on V3 is a big leap from previous versions . Clear UI, easy to navigate, I wish the reports were able to be displayed and had the option to send instead of the send-to-see default option. However , the app is still missing one very useful tool/feature: Sunlight forecast based on weather forecast (Netatmo has this info in their app) this feature it is particularly useful to us for planning when to charge our Electric Vehicles as we want to be able to charge them with 100% renewable energy and also to avoid the transmission fees from our Power Company if we have to buy energy from them (nights and cloudy days)Please add this feature and fix the reports and you’ll get the 5 stars!
Not user friendly
UPDATED REVIEWEnlighten had an app worthy of a 3 star review. They made some changes and it was only worth 1 or 2 stars......Well, they changed it again (as they promised) and it is much better. Now There is useful information that I can understand and I can monitor my system much easier. Thank you. OLD REVIEWI’ve been using the App for 15 months and the upgrades made it more difficult to use and understand. This App is suppose to allow for the monitoring of the system. Unfortunately it never gave the consumer all the information available, eg.. production of individual panels, although this information is available to the company. The changes to the App now make it difficult to compare production over days, weeks and months. It is now really difficult to know how the system is performing. The prior version produced bar graphs the were easy to read and meaningful. It appears the changes were designed to limit the information to the consumer on how the system performing. Why would they do that? Maybe to prevent us from knowing when the panels were not performing up to their stated ability.
V3.0 is terrible vs V. 2.xx
I have explored this version and I think it is terrible. The types of reports you can run have been greatly reduced. For example the report that let you look at multiple reports by year with monthly detail side by side is gone? How can look at historical data without this. Graphs are terrible now, above and below bar charts don’t let you see what is happening easily at a glance. If you are not technically inclined this may be O.K.but if your more analytically inclined it’s a downgrade! Perhaps you could add the old reports and format as a second optional skin / interface?As for other commenters who don’t see panel level monitoring in the birds-eye view etc. It is because your installer didn’t offer it to you so you only see system level monitoring in aggregate. Some don’t want you to have it because customers call them too much about the info it provides confuses some customers. Shading, weather, time of day etc. I negotiated it in my contract and got them to pay for it as they claim it’s a few hundred dollar upgrade. I think you should have it so call your installer.
V3.0 is a regression
I’ve been using Enphase for the last couple of years since installating my home solar system. I found the previous V2 interface easier to get current data, and it worked equally well with both my iPhone and iPad... Sadly, the new V3.0 that came out today may look like a better or more modern interface to some with it’s larger graphics, but getting to current data just isn’t as intuitive — at least to me. There seems to be less info per screen, and little things like monthly view shows relative bars for the previous month, but no dates to get a sense of when things were going on and how weather patterns effected performance. Additionally, I use my iPad most of the time and V3.0 has lost a horizontal mode that I use 99.9% of the time, so now I have to turn my iPad into portrait mode with my keyboard on the side to use the app.Love my inverters and solar array. Love the ability to get to real time and historical data of my system performance via the app — thank you. ...but sadly, the presentation of that information just isn’t doing it for me any more. There is work to be done.
Description
Enlighten is the monitoring experience built specifically for the system owner. Delivering at-a-glance verification, Enlighten gives you the assurance that your Enphase System is performing as expected. - Easily verify system health and performance. - View energy production by month, day, or hour. - Analyze performance against historical weather data. - Run reports of energy production and energy usage from the app
More By This Developer
You May Also Like
POWER SUBSCRIPTION REVENUE GROWTH
