The trigger should be updated to the latest firmware which can be found at https://www.fjwestcott.com/4705. FJ-X2m APP SETUP The settings of the FJ400 can be adjusted through the FJ-X2m App app via the FJ-X2m Wireless Radio Trigger. The app will also allow for different scenes to be created and saved to minimize the same setup in the future. ___________ Initial Setup Before pairing the FJ-X2m with the mobile device ensure that the FJ-X2m and FJ400 are communicating by pressing the TEST button on the FJ-X2m to fire a test shot on the FJ400. Turning on Bluetooth® on the FJ-X2m Universal Wireless Trigger • Turn on the FJ-X2m by long-pressing the Power | Menu button. • Press the second and third Menu Selection buttons at the same time to enter the Settings menu. • Scroll down on the Selection wheel until the Bluetooth icon is highlighted green. • Press down on the wheel to highlight [OFF], then press down on the wheel once to change the status to [ON]. • Press OK to return to the main screen and notice the Bluetooth icon in the bottom right-hand corner. Note: Turning off the FJ-X2m will also turn off Bluetooth functionality and the process above will need to be repeated upon the next start-up. Connecting the FJ-X2m to an iOS Device • Turn on the FJ-X2m by long-pressing the Power | MENU button. • Turn on the FJ400 by long-pressing the Power | MODEL button. • Open the FJ-X2m app on the compatible iOS device. • When the app displays the Select Devices screen, select the FJ-X2m from the list of available devices. • The default screen will show two boxes: Studio 1 and +. • Click Studio 1 to set up your first scene. • Click + to create an additional scene. Note: Studios are independent scenes from one another. Note: Ensure that the iOS device is running the latest operating system and the app is up-to-date. Ensure that both the FJ-X2m and FJ400 are operating with the latest firmware releases.
Show Less
