When it is set to OFF, the change is immediate. - Filter: keep a selected frequency band of the slowed signal. When the filter is ON, the middle colored band is processed by the effect while the low and high bands remain unchanged. - Fade: Sets the duration of the crossfade between loops. - State: Activates or deactivates the SLOW DOWN stage - Dry/Wet: mixes the dry and wet signals ____ TIME STOP stage: Especially made for performance, TIME STOP gives an intuitive and visual way to instantly create a classic tape stop effect. - Trigger: the “Stop” button triggers the time stop effect within a given duration (set by the position of your finger along the Y-axis) and following a curve (set by the position of your finger along the X-axis). - Mode: choose between 4 time stop modes: ‘Step’, ‘Ramp Up & Down, ‘Ramp Down’ and ‘Ramp Up’. _ In ‘Step’ mode, the speed instantly goes to 0 when the trigger is hit and goes back to 1 when the trigger is released. _ In ‘Ramp Up & Down’ mode the speed is ramped down to 0 when the trigger is hit and ramped up to 1 when it is released. The duration and curve of the ramp is set by the position of your finger on the control. _ In ‘Ramp Down’ mode, the speed is ramped down to 0 when the trigger is hit and instantly goes back to 1 when released. _ In ‘Ramp Up’ mode the speed instantly goes to 0 when the trigger is hit and is ramped up to 1 when released. - Hold: when Hold is ON, the trigger is not released until Hold is turned OFF. - Speed: precise control of the play speed. - State: Activates or deactivates the TIME STOP stage - Dry/Wet: mixes the dry and wet audio signals ____ SPEED SEQUENCER stage: The speed sequencer stage offers a unique way to program speed variations in your music. - Length: sets the number of steps in the sequencer. - Resolution: sets the duration of a sequencer step. - Grid Snap: when ON, steps snap to the grid allowing a precise rhythmic and harmonic editing. - Sequencer: sets a playing speed per step. Each step has 4 different curve modes: ‘Step’, ‘Link’, ‘Ramp Up’ and ‘Ramp Down’. Change the curve mode by tapping the curve icon at the bottom of each step. - Amount: controls the amount of sequencer speed modulation. 100% means that speed can go from 1 to 0 (50% means that speed can go from 1 to 0.5). - Randomness: sets the amount of randomness of the sequencer. If randomness is 50%, a step value will be a random value between stepValue +/- 0.5 - Fade: controls the crossfade duration between each step. - State: Activates or deactivates the Speed Sequencer stage - Dry/Wet: mixes the proportion of dry and wet signals Check out www.bleass.com for video tutorials and more info! * PLEASE NOTE: this is an Audio Unit Effect plugin (AUv3) which requires a compatible host such as AUM, GarageBand, Cubasis, BM3 or Auria. Standalone mode also available for demo purposes.